For anyone doing electrical work, this is even more important, since poor wiring can cause injury or lead to property damage. Edge hidden or protected by some mechanism that prevents contact with the skin, either of the hands or fingers.Getting the right tools is essential with any type of project.Insulated body, to avoid electrocutions.In short, look for those tools that possess the following qualities: In addition to these parameters, a good gripper wire stripper It must offer a good grip (that is, prevent it from slipping due to the presence of sweat on the hands) and an anatomical posture, which does not stress the joints. The wire stripper Ideally, it should offer protection against the three types of accidents that we saw earlier (cuts, pinching due to pressure and electrocutions), without prejudice to the operation for which it was designed being affected: stripping and, optionally, cutting the cables. What should I look for in a wire stripper? Additionally, they also allow the internal sheath to be cut, with which these models offer a neat and safe cut on coaxial cables. They differ from wire stripper general purpose tubulars in which the blades are designed to cut through the insulation without damaging the internal mesh.

These models are generally of tubular design, and house the cutting edges inside, so their operation is totally safe, even on energized cables. It should be noted that the operation is extremely simple and safe, thus avoiding the risk of cuts, pinching, electrocutions and poorly made cuts. The operation is very simple: the tube is opened, the end of the cable is placed inside, measuring the section that we want to strip, the tool and turns it around thus, the internal edges will begin to cut to the desired depth, thus exposing the conductor and without the need to unnecessarily stretch the cable or risk making a failed operation that leaves us with an even shorter cable. There are different circumstances that make it desirable to work with this special model: when installing mortise fixtures (which requires stripping cables that are installed deep in a hole in the ceiling, or inside boxes that are difficult to access), or when the final segment of the cable is very short, and we want to avoid a failed stripping operation that would leave us with an unusable cable. They are also useful when precise stripping of a cable with only a small stub remaining is required. They are designed to be easily handled in those places that, due to their layout, prevent easy access with other tools. There are several types of wire stripper to choose: General Purpose Wire Stripper Electrocution: usually occur when using wire stripper that are not properly insulated, or whose insulation has worn away over time.Īccording to the work to be carried out, the wire stripper suitable.Pressure: Occurs mostly in tools commonly used like needle-nose pliers, and is triggered by placing your finger or hand in the area of pressure application.cut: it is the most common accident, and usually occurs when the finger is inside the cut area of the tool.

There are three risks in operating a wire stripper without taking the corresponding safety measures: cutting, pressure and electrocution. What damage can unsafe wire strippers cause? There are also different types of wire stripper: there are those for general use or specific for certain types of cable, such as coaxial ones. Safety in operation is achieved in different ways: some wire stripper they have a hidden edge or they have some system that prevents the contact of the fingers or the hand with that edge when it is exposed. Sometimes they even allow to improve the efficiency of the operation, being, in this case, superior to the wire stripper or traditional pliers that do not have certain security measures. Basically, they are tweezers wire stripper that allow sectioning or winding of electrical conductors without risk of accidents for the operator.

Types of wire strippers